Thomas COVID Supplier BadgeDisplaysResourcesCOVID-19 SUPPLIESGalleryGet a Quote

This polyamide 6 grade, containing a metal detectable additive, has been specifically tailored for use in the food processing and packaging industries where it can easily be traced by the conventional metal detection systems installed to detect contamination of the foodstuffs (result may vary depending on the sensitivity of the metal detection system used). Metal Detectable Nylon presents good mechanical strength, stiffness, impact strength and wear resistance. It also features a food contact compliant composition, FDA compliant and 3A-Sanitary-Dairy-Standard approved.


  • High wear and fatigue resistance
  • Lower moisture absorption than standard PA6
  • Metal and visual detection by blue color
  • Detection by x-ray also possible
  • Continuous use temperature up to 85 °C (185 °F)


  • Nylatron® MD

Emco Industrial Plastics doesn’t claim to represent all of the manufacturers or trade name products listed. This list is intended as a guide of typical materials available for purchase from Emco Industrial Plastics, Inc. For additional information, contact an Emco Industrial Plastics representative by filling out the form below.


Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name

Available In
Sheet, Rod

Start Your Quote

Send us a message:

*Required Fields



Stock Products Properties Applications Advantages Downloads


Sheet 3/8″ – 4″ TH 48 x 96 CTS Blue
Rod 30mm 50mm 80mm 1,000mm 3,000mm Blue

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.


Physical PropertiesUnitsASTMResults
Density g/cm3 1.21
Water Absorption, 24 hrs % 78
Mechanical PropertiesUnitsASTMResults
Tensile Stress at Yield MPa 25
Comprehensive Stress at 1/2/5 % nominal strain MPa 35/67/92
Ball Indentation Hardness 170
Rockwell Hardness M85
Charpy Impact Strength notched kJ/m^2 kJ/m^2
Charpy Impact Strength unnotched kJ/m^2 80
Thermal PropertiesUnitsASTMResults
Coefficient of Linear Thermal Expansion m/m(K.m) 100 x 10^-6
Thermal Conductivity °C 0.28
Melting Temperature °C 220
Min. Servicing Temperature °C -25
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.


  • Wear strips
  • Guide rails
  • Corner wear bends
  • Chain guides
  • Bushes
  • Scrapers
  • Rollers
  • Idler wheels
  • Liners


  • FDA Approved
  • Metal detection
  • Impact-resistant
  • Wear-resistant
  • Good machinability
  • Low moisture absorption
  • High wear and fatigue resistance
Copyright © 2016 - 2022 Emco Industrial Plastics
SG飞艇全天计划 秒速赛车稳赚方法 澳洲幸运5注册平台 澳洲5精准计划 快乐飞艇计划网 极速赛车技巧 极速赛车现场开奖结果 澳洲5官方开奖