- Industries Served
- Contact Us
PVC pipe is produced from a specialty blend of polyvinyl chloride material with unique physical properties desirable for piping applications (i.e., improved impact resistance and good fire resistance capabilities). Pipe grade PVC product line includes schedules 40 and 80 piping from 1/4″ through 24″ diameters. PVC piping systems can handle more than three-fourths of the temperature/pressure requirements of today’s typical process plants. PVC pressure pipe has an upper working temperature limit of 200° F (93° C), or approximately 60° F (15° C) above that of Type I Grade I PVC. As with all thermoplastic piping systems, PVC’s ability to withstand pressure varies with pipe diameter, wall thickness, and temperature. As the pipe diameter and temperature increases, the pressure rating of the product decreases. For example, 1/2″ Schedule 80 PVC pipe is engineered for continuous service of 850 psi @ 73°F (23°C). The same pipe in service @ 180°F (82°C) carries a maximum working pressure rating of 210 psi at this temperature. 6″ Schedule 80 PVC pipe is designed for 270 psi @ 73°F, and 54 psi @ 200°F.
Since the chemical properties of resins may vary and the types and quantity of additives, contact an Emco Industrial Plastics representative before designing material handling systems using PVC.
Emco Industrial Plastics doesn’t claim to represent all of the manufacturers or trade name products listed. This list is intended as a guide of typical materials available for purchase from Emco Industrial Plastics, Inc. For additional information, contact an Emco Industrial Plastics representative by filling out the form below.
Contact us today for your fabrication and machining needs!Request Fabrication/Machining Services
Polyvinyl Chloride, Pipe Grade
Sched 40,Sched 80, Other
Start Your Quote
Send us a message:
|Sched 40||1/4″ – 24″ DIA||20’ lengths, CTS||Natural, Black|
|Sched 80||1/4″ – 24″ DIA||20’ lengths, CTS|
|Other||Fittings: Tees, Elbows, Flanges, Couplers, Plugs, Caps, Bushings, Crosses, Unions|
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
|Water Absorption, 24 hrs||%||D570||0.05|
|Tensile Strength @yield||psi||D638||7450|
|Hardness, Rockwell R||D785||110 – 120|
|IZOD Impact Strength Notched||ft-lb/in||D256||0.75|
|Coefficient of Linear Thermal Expansion||(x 10⁻⁵ in./in./°F)||D696||2.9 x 10⁻⁵|
|Heat Deflection Temp at 264 psi||°F||170|
|Flammability Rating||UL94||V – O|
|Dielectric Strength, 1/8″ th.||V/mil||D149||1413|
|Dielectric Constant @60HZ||D150||3.70 @ 30° F|
|Volume Resistivity||ohm-cm||D257||1.2 x 10¹²|
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.
NOTE: Several grades of this material are available. For additional information regarding this plastic, contact your Emco Industrial Plastics representative or call 973-862-4148.