- Industries Served
- Contact Us
PolyEtherEtherKetone (PEEK) is a high-performance engineering thermoplastic that offers chemical and water resistance while operate at higher temperatures. Peek Unfilled is a general-purpose grade that is unreinforced and offers the highest elongation and toughness of all PEEK grades. Unfilled PEEK is available in sheet and rod forms in multiple colors including: natural (a very light brown or tan) and black colors. Black PEEK is ideal for instrument components where aesthetics is important, as well as for seal components where ductility and inertness are important. All unfilled PEEK grades comply with FDA regulation 21 CFR 177.2415 for repeated food contact.
Additional formulations (i.e., glass-filled, mineral-filled, carbon-filled, bearing, and medical grades) and variants within these grades (FDA compliant, static dissipative, high temperature) are available to meet specific application demands. Contact an Emco Industrial Plastics representative who can help you choose the correct material to meet the needs of your application.
Emco Industrial Plastics doesn’t claim to represent all of the manufacturers or trade name products listed. This list is intended as a guide of typical materials available for purchase from Emco Industrial Plastics, Inc. For additional information, contact an Emco Industrial Plastics representative by filling out the form below.
Contact us today for your fabrication and machining needs!Request Fabrication/Machining Services
Sheet, Rod, Tube
Start Your Quote
Send us a message:
|Sheet||0.03″ – 2″ TH||Up to 24″ x 48″; CTS||Natural, Black|
|Rod||0.25″ – 6″ DIA||Std. foot lengths; CTS||Natural, Black|
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
|Water Absorption, 24 hrs||%||D570||0.1|
|Tensile Strength @yield||psi||D638||16000|
|Tensile Elongation @Break||%||D638||20|
|Hardness, Rockwell R||D785||R126 (M100)|
|IZOD Impact Strength Notched||ft-lb/in||D256||1|
|Coefficient of Linear Thermal Expansion||(x 10-⁵ in./in./°F)||D256||2.6|
|Heat Deflection Temp at 264 psi||°F||320|
|Max Operating Temp||°F||480|
|Dielectric Strength. 1/8″ th.||V/mil||D149||480|
|Dielectric Constant @1 MHz||D150||3.3|
|Dissipation Factor @1 MHz||D150||0.003|
|Volume Resistivity, 50% RH||ohm-cm||D257||4.9 x 10¹⁶|
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.
NOTE: Several grades of this material are available. For additional information regarding this plastic, contact your Emco Industrial Plastics representative or call 973-862-4148.