- Industries Served
- Contact Us
Nylon, one of the most widely used engineering thermoplastics, is an extremely versatile engineering plastic. An excellent combination of mechanical performance (toughness, low coefficient of friction, and good abrasion resistance) and cost make Nylon an ideal replacement for a wide variety of materials from metal to rubber.
Oil Filled Nylon is a special formulation of liquid lubricant encapsulated during manufacturing which provides for true lubrication at the bearing surface. This is a cast nylon with built-in oil lubrication. During the manufacturing process, oil lubrication is completely and evenly dispersed throughout the cast nylon, making it an integral part of the material’s structure that cannot spin out, dry out, or drain out, even under the harshest working conditions. This oil-filler reduces friction by as much as 25% at the bearing interface and can result in longer wear life than unfilled or moly-filled cast nylons. The standard grade is green in color, but a natural (off-white) colored FDA & USDA approved grade is also available.
By varying the conditions through the addition of various additives, fillers, lubricants, and colorants during polymerization, the mechanical properties of cast nylon may be altered to suit specific applications. Formulations include molybdenum-disulfidefilled, moly and oil-filled, and glass-filled grades. Variants within these nylon grades are available to match specific application demands such as FDA compliance, Internally lubricated, heat stabilized (blue), or impact modified.
Contact an Emco Industrial Plastics representative who can help you choose the correct material to meet the needs of your application.
Emco Industrial Plastics doesn’t claim to represent all of the manufacturers or trade name products listed. This list is intended as a guide of typical materials available for purchase from Emco Industrial Plastics, Inc. For additional information, contact an Emco Industrial Plastics representative by filling out the form below.
Contact us today for your fabrication and machining needs!Request Fabrication/Machining Services
Sheet, Rod, Tube
Start Your Quote
Send us a message:
|Sheet||3/16″ – 4″ TH||Black|
|Rod||2″ – 12″ DIA||Black|
|Tube||2″ OD – 18″ OD|
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
|Water Absorption, 24 hrs||%||D570||0.5|
|Tensile Elongation @Break||%||D638||50|
|Hardness, Rockwell R||D785||110|
|IZOD Impact Strength Notched||ft-lb/in||D256||1.6|
|Coefficient of Linear Thermal Expansion||(x 10-5 in./in./°F)||D256D256||3.5|
|Heat Deflection Temp at 264 psi||°F||360|
|Max Operating Temp||°F||230|