- Industries Served
- Contact Us
Chemfluor 767® maintains an outstanding electrical-insulating capability through thermal cycling and in high humidity environments, and will not deform under load at room temperature. This material’s high compressive strength and dimensional stability make it a good choice for structural material, while its low outgassing rate (0.01% TML, 0.00% CVCM, 0.00% WVR when tested per ASTM E-595-90), and permeability make PCTFE a great choice for laboratory, aerospace, flight applications, and instrumentation.
Emco Industrial Plastics doesn’t claim to represent all of the manufacturers or trade name products listed. This list is intended as a guide of typical materials available for purchase from Emco Industrial Plastics, Inc. For additional information, use the form below to contact a representative.
Contact us today for your fabrication and machining needs!Request Fabrication/Machining Services
ASTM-D-1430, AMS 3650, FDA Regulation 21, CFR 177.1380, ITAR Registered
Start Your Quote
Send us a message:
|Water Absorption, 24 hrs||%||D570||0.01|
|Tensile Elongation @Break||>50||D638||150|
|IZOD Impact Strength Notched||ft-lb/in||D256||5|
|Coeffcient of Linear Thermal Expansion||x10^-5/K||7|
|Heat Deflection Temp at 264 psi||°F||258|
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.